Category » ALTERNA - Vented - Contemporary Gas Fires

There were 4 articles found in this category:

1. Gas log safety pilot kit will not light?
   Be sure that the inlet and outlet are connected in the correct locations. Remove the heat shield for the gas valve and verify per the arrows on the valve. Inlet (Arrow pointing into the valve) should be coming from the gas supply line. Outlet (Two arrows pointing away from the valve) should co ...
2. Installing glass in a C or CXF Burner
   When installing a C (Custom Pan Burner) or CXF (Custom Embers Pan Burner), we suggest the following: Installing Indoors with Natural Gas: Place sand under baffle plates and cover burner tubes, top with approximately 1" of glass Installing Outdoors with Natural Gas: Place volcanic ash under baffl ...
3. Damper - Open When Not in Use?
   QUESTION: Do the vented fireplace logs have to have the flue vent open even when it is not being used? Some one told me that in Maine, the flue has to be permanently fixed in the open position by the installer. Of course, this would allow a lot of heat to go up the chimney all winter long. AN ...
4. FireStone Sizes, Individual
   Below are the sizes of the individual FireStones used in our various FireStone Assortment Packs. STA1 - Large Size Stone Assortment (six stones) Covers .75 sq. ft. (stones laid flat touching each other) Item Wt (lbs) Height Length Width ST1 ...