View Articles by Category

Category Icon Product Information/Questions (3)
Category Icon Brochures (2)
Rasmussen Vented Gas Logs Brochures
Category Icon Instruction Manuals (1)
Rasmussen Vented Gas Logs Assembly, Operation, and Instruction Manuals
Add an article to this category

Category » Gas Logs - Ventedrss button

Information on Rasmussen Vented Gas Log Sets

There were 6 articles found in this category:

  1. questionGas log safety pilot kit will not light?
    Be sure that the inlet and outlet are connected in the correct locations. Remove the heat shield for the gas valve and verify per the arrows on the valve. Inlet (Arrow pointing into the valve) should be coming from the gas supply line. Outlet (Two arrows pointing away from the valve) should co ...
  2. questionDo all of your vented gas logs have a certification?
    Although many of our sets are listed, the LC & LD (Multi-Burner), C (Custom Pan Burner), CXF (Custom Embers Pan Burner) and TNA (Tipi/Andiron Burner) systems are not listed by a certification agency. Not all of our designs can meet the requirements of the established standards. To meet the re ...
  3. questionDo your gas logs have a certification?
    Our Vent-Free and "F" Vented Burner gas logs are certified by OMNI Testing Laboratories which are one of the many whole alphabet soup of independent third-party testing laboratories and listing agencies who test products to recognized standards. This is what is important, not necessarily the ...
  4. questionHow to install multiple remote units at one installation.
    Whenever someone has two remotes and two appliances, and one or both of the remotes is turning on both appliances: On receiver #1 press and hold the learn button for about 6-8 seconds, until 3 long beeps are heard. Slide the switch to OFF. Receiver is now CLEARED of all transmitters. On rece ...
  5. questionDamper - Open When Not in Use?
    QUESTION: Do the vented fireplace logs have to have the flue vent open even when it is not being used? Some one told me that in Maine, the flue has to be permanently fixed in the open position by the installer. Of course, this would allow a lot of heat to go up the chimney all winter long. AN ...
  6. questionSet Sizing for a See-Through Fireplace
    QUESTION: How do you size a log set for a see-through fireplace? ANSWER: Almost all Rasmussen gas log and ALTERNA styles are available in “Double Face” for see-through fireplaces. • Vented set using a safety control, subtract 12” from the fireplace opening width and round ...